RF-3V Micro Electric Cylinder
| Body width | 34mm |
|---|---|
| configuration | Integrated unit of precision ball screw and servo motor |
| Stroke range | 30、50mm |
| Lead | 1、2、4、6mm |
| Load | 0~8kg |
| Repeatability | ±0.01mm(Common)，±0.005mm(Precise) |
| Guideway | Miniature linear guide and cross roller guide optional |
| Drive method | Ballscrew grade C5 |
| Encoder | 17 bit multi-turn absolute encoder |
| Control mode | External controller, supports point-to-point positioning, pulse, RS485 and EtherCAT bus control |
Go to Overview of RF Series ↑
Details
| Name | Integrated intelligent electric actuator |
|---|---|
| Specification series | RF-3V |
| Brand | VINKO |
| Guideway | Miniature linear guide and cross roller guide optional |
| Drive method | Ballscrew |
| Control mode | PIO(64 points), Pulse, Modbus RTU, 485andEtherCAT fieldbus |
| PC Software | VINKO Motion |
| Cable outlet position | Front side cable outlet / Rear side cable outlet (optional) |
More
1. Due to the technical upgrading or improvement of the product, the actual data and content of the product may be changed. The product data is subject to the material object without further notice.
2. This product is a part of ordinary production equipment, excluding vehicles, machinery, ships and other means of transport for transportation.
3. This product is not suitable for: medical devices for human medical and diagnostic purposes; Please pay attention to the electronic devices and household appliances used in ordinary families.
3. The company's products are prohibited from being used for space aircraft, atomic energy machinery and weapons, weapons and other military purposes.
4. This product is applicable to the environment temperature of 0~40 ℃, the relative humidity is lower than 80%, and there is no condensation.
5. The operating environment shall be free of corrosive, flammable and explosive articles.
6. The use environment shall be free of oil mist or cutting fluid, and shall not be used in situations where there is adhesive, liquid paint, destructive dust, metal cutting particles and other destructive particles.
7. It shall not be used in the situation with strong vibration, and the vibration acceleration shall not exceed 0.3G (1G=9.8m/sec2).
Response
For technical, use, price information about this product, please click here.
Proposal
Would you like to tell us that you have better suggestions for our products and services?
